All About Apple iPhone 6s Unlock Chip You Need to Know

Have you purchased an iPhone from a cellular company or through a contract? So, it’s clear that you aren’t free to use your Apple iPhone 6s. The most common barrier is that you can’t use a SIM card from another network. The good news is that you can set up your Apple iPhone 6s to connect to any network you want in several ways.

In this article, we’ll talk about the Apple iPhone 6s unlock chip and special software that can remove SIM restrictions from your Apple iPhone 6s. After reading this article, I hope your Apple iPhone 6s’s network settings will continue you from doing what you want.

What is iPhone Unlock Chip?

iPhone unlock chip is a microchip that unlocks the iPhones and makes them able to run on any network worldwide. When you buy an iPhone, it is either locked (unable to accept carrier) or factory unlocked (can accept any carrier). These unlock chips can bypass the carrier locks in iPhones and enable locked devices to work with any SIM.

An unlock chip is an easy and cheap way to get an Apple iPhone 6s to work with a different SIM card Using iPhone unlock chip enables the locked Apple iPhone 6s to call and send SMS using the local network sim card, just like a factory-unlocked phone does. There have been different unlocking chips available with different names and brands, but they all do the same thing.

How does it work

An unlock chip is typically a slim SIM card, a memory interface chip that can be put in along with your regular SIM card. It goes on top of your Apple iPhone 6s’s normal SIM card and removes the network lock so you can use any sim.

The factory lock is removed quickly when an unlock chip is put into your Apple iPhone 6s. An iPhone Unlock Chip fools your Apple iPhone 6s into thinking it only uses a Cricket SIM card. The Apple iPhone 6s Unlock Chip has the structure to fake the iPhone’s IMEI number and the authentication key, which allows it to work with any GSM Service.

Putting an iPhone Unlock Chip around your regular SIM card changes how your Apple iPhone 6s and SIM card talk to each other. So, the unlock chip’s controller fakes the IMSI number, which allows you to use other mobile networks.

Unfortunately, many iPhone unlock chips require a jailbroken iPhone before being used. Even if your Apple iPhone 6s isn’t jailbroken, you can still use an iPhone unlock chip to access some of its features.

There are several places to find information about jailbreaking an iPhone. After selecting, you can program your Apple iPhone 6s’s unlock chip by following the on-screen instructions.

Pros and Cons of iPhone Unlock Chip

If you use an unofficial method for any task, it gets the benefit for a short time, but some losses are also associated with it.

Pros:

• Unlock chip SIM card doesn’t cost much.
• It’s a simple way to get into your Apple iPhone 6s.
• It works with almost every kind of iPhone.
• It works with many carriers in many different countries.

Cons:

• It can unlock iPhones and iPads only. It doesn’t work with Android
• It reduces your battery life
• It could cause problems with the SIM card slot and your regular SIM card.
• Taking out the unlock chip from your Apple iPhone 6s will lock it again.

Best iPhone Unlock Chip

An R-SIM card is a 0.2mm-thick memory interface chip that can work with your regular SIM card. On top of your Apple iPhone 6s’s regular SIM card, it breaks the network lock, so you can use any network you want.

R-SIM works with many carriers in different countries and lets you make calls, send messages, and do other things, just like a factory-unlocked device. There have been different versions of R-SIM, with R-SIM 16 being the most recent. R-SIM also comes in various types and brands. Here are some of them:

• GPP
• GEVEY
• SUPREME SIM
• SMARTSIM
• HEARD HEIM

You have to put the unlock chip sim card in your Apple iPhone 6s along Sim card

1. Turn off your Apple iPhone 6s and take out the sim tray.
2. Please take out the SIM card and put it around the SIM unlock chip.

1. After inserting and turning on your mobile, a pop-up screen will enable you to change your ICCID/SIM number. Enter the ICCID number printed on the back of your Turbo SIM card into the “ICCID/SIM Number” section.
2. After entering the correct ICCID number, your Apple iPhone 6s will enable the use of a different SIM card. Now you can use your Apple iPhone 6s with a sim of any network.

Bonus Tips: Easy App for iPhone SIM Unlock

With the SIM-unlock feature in Dr.Fone, the unlocking process will be much easier for all users. Moreover, if you have some other iPhone device issues, Dr.Fone can also give you a great answer.

Dr.Fone - Screen Unlock (iOS)

Step1: In the first step, Download and install the Dr.Fone - Screen Unlock (iOS)

Step2: After installing Wondershare Dr.Fone on your computer, start it up. Go to the home page and choose “Screen Unlock” from the list of options.

Click here


Step3: In the next window, if you want to remove the network use restriction on your device, you need to choose “Remove SIM Locked.”

Step4: When your iOS device is ready to be SIM unlocked, tap “Start” to begin the procedure.

Step5: After that, the software finds the connected iPhone and gives a list of information about it. Check that all the information is correct, then click “Unlock Now.”

Step6: You must jailbreak your Apple iPhone 6s before moving on with the process. This process works with iOS 12.0 to iOS 14.8.1 on iPhone 5S to iPhone X. So, if you need to learn about technology, the guide and the video can help you greatly.

Step7: In the next image, you need to do 3 small tasks on your Apple iPhone 6s. Take out the SIM card and go to “Settings” on the Apple iPhone 6s device. Go to the “WLAN” category and tap “Forget This Network” on every connection you’ve made. Now you should turn “WLAN” off your iOS device and insert the SIM card again. To continue the process, click “Continue” on the screen.

Step8: The SIM unlocking process starts, and the status bar shows how far along it is.

Step9: All of the barriers from the SIM carrier are taken away. To finish the process of unlocking the SIM lock on your iOS device, tap “Done.”

Click here


Great! You are free to choose your ideal carrier!

How Can I Buy iPhone Unlock Chip?

An unlocked chip can be easily purchased online. These chips are available on sites like Amazon, Ali Express, eBay, etc. Besides, you can also buy them in the offline market.

But if you want to buy online, you should verify the seller’s positive feedback ratings to be sure you’re purchasing a genuine item. Moreover, carefully read and understand the product description, and see the pictures and videos (if available) before placing your order.

Average prices of iPhone Unlock Chip

In both online and offline markets, you can buy iPhone unlock chips. These chips are available in different types and different brand names. Their prices may vary with the type and brand. However, the average price of an iPhone Unlock chip is $14. You will find different brands of chips at a higher or lower price than this.

The Bottom Line

So you can easily eliminate the carrier locked issue of your Apple iPhone 6s. Unlocking the network restrictions with Dr.Fone - Screen Unlock is a very safe way to do it. Because there are some problems with using the Apple iPhone 6s unlock chip. Using this chip could affect your Apple iPhone 6s’s battery life. Also, it might damage the SIM card slot and even your regular SIM card.

The Ultimate Guide to Unlocking Your Apple iPhone 6s on MetroPCS

If you own an iPhone that is MetroPCS-branded, the carrier will probably lock it, making it impossible to use a SIM from another carrier on the Apple iPhone 6s device. Therefore, you will have to unlock iPhone MetroPCS for this purpose.

Many people find it difficult to unlock their MetroPCS iPhone and resort to buying a new phone altogether to use it with another service provider. In this article, you will learn how to use the MetroPCS unlock phones feature with three different methods. So, let’s get started!

1. Calling MetroPCS to Unlock Phones

The first and most straightforward method to carrier unlocks MetroPCS phone is to call the company. But before you do that, make sure whether your phone has GSM/LTE or CDMA technology. Check for the small slot on the side of your phone to see whether there’s a SIM.

If your phone does not have a SIM, it uses CDMA technology. You will have to call your new carrier company and request them to unlock your phone in such a case. However, if you find a SIM card, your phone works on GSM or LTE and can easily be unlocked by contacting MetroPCS customer care.

Here’s how to do that:

Step 1

Call 1-888-863-8768 to reach the MetroPCS customer service, and request a MetroPCS network unlock code.

Step 2

They might ask you to provide your phone number, name on the MetroPCS account, email address, and PIN. Therefore, keep this information at hand.

Step 3

They will send you a confirmation email within 2 to 3 business days, containing the MetroPCS unlock code and instructions on how to use it.

Step 4

The instructions involve turning off your phone, inserting the SIM card of the new carrier, and entering the provided code when prompted. And that’s how you unlock your MetroPCS phone for free via the official method.

The downside of this method is again the time consumption. You have to call and wait for your turn, answer a bunch of questions, and wait for several days before receiving a confirmation email. If you want to save all this time, you can unlock iPhone MetroPCS for free using a more time-efficient method, i.e., using an unlock tool like Dr.Fone – Sim Unlock .

2. Unlock iPhone MetroPCS with an Unlock Tool

If you’re in a hurry and can’t spare 2 to 3 days to unlock your phone, you can use an unlock tool like Dr.Fone that helps unlock your Apple iPhone 6s in just 5 minutes. It is reliable, foolproof, and secure. And the best part about Dr.Fone is that it supports all iPhone models from XR to iPhone 13, so if you meet the “Sim not supported” issue on your MetroPCS iPhone 8 or 7, no worry at all. This high-success rate professional tool unlocks your phone without the fear of losing any data.

Dr.Fone - Sim Unlock (iOS)

Unlock iPhones MetroPCS to Switch to Any Carrier within Minutes

• Support newly released models from iPhone XR to iPhone 13 and later.
• No jailbreak is needed. Unlocking iPhone without an R-SIM.
• Compatible with most carriers, T-Mobile, Sprint, Verizon, etc.
• Move to any network operator within minutes aimlessly without data loss.

4,008,669 people have downloaded it

So, if you want to unlock iPhone MetroPCS using this amazing tool, follow these steps below:

Step 1

Download and launch Dr.Fone on your PC, and select the “Unlock SIM Lock” option.

Step 2

Connect your Apple iPhone 6s to the PC and click on “Start” to begin the authorization process.

Step 3

A pop-up with confirmation settings will appear on your screen. Click on “Confirmed” to continue.

Step 4

You will receive a configuration profile on your Apple iPhone 6s. Click “Close” to download the profile.

Step 5

Now, go to “Settings > Profile Downloaded > Install” on your Apple iPhone 6s.

Step 6

Enter your screen unlock password to unlock the screen.

Step 7

Click on “Install” at the top-right corner of the screen and then again at the bottom.

Step 8

This will install the configuration profile on your device. Follow the steps show on your PC, and click “Done” to finish the installation process.

If you have any problems during the sim unlocking process, you can follow the Sim unlock guide in detail to carrier unlock the MetroPCS phone. This process involves several steps and might seem long, but it hardly takes 5 to 10 minutes. Also, it is the safest and most reliable way with a high success rate to unlock iPhone MetroPCS.

If you’re looking for a way to unlock your MetroPCS phone for free but without going through technical steps, you can use the Apple iPhone 6s device Unlock app.

3. Unlock MetroPCS Phone Using an App

The Device Unlock app is automatically installed in MetroPCS-locked phones, so you can easily find it in the apps folder or the MetroPCS folder. However, this app is only compatible with Android devices.

So, if you have an Android phone, follow these steps to unlock it using the Apple iPhone 6s device Unlock app:

Step 1

Connect your phone to a Wi-Fi internet connection, and launch the Apple iPhone 6s device Unlock app.

Step 2

The app will ask you whether you want to unlock your device permanently. Click on “Permanent Unlock.”

Step 3

Once your device has been unlocked, the app will ask you to restart your phone, after which the Apple iPhone 6s device will be permanently unlocked, and you can use any network’s sim card on it.

Troubleshooting Issues

It is possible that when you use the Apple iPhone 6s device Unlock app, some error messages might pop up. Here are the common errors and their solutions:

1. If you get the following errors:

• Data corrupted
• Server not responding
• No internet connection
• Failure to apply to unlock

Turn off your Wi-Fi, and move to a place that has strong signals. Now turn your Wi-Fi back on and try again.

2. If you get the “Data not recognized” errors, you’ll have to unroot your phone. For this, search for the unroot guide for your smartphone’s specific model and follow the instructions.

3. For the “System maintenance error,” wait for a few hours and then try again, as the system might be going through maintenance and won’t process the unlock.

FAQs on MetroPCS Unlock Phone

Here are some frequently asked questions by our customers:

Q. What is the MetroPCS unlock code?

The company provides a MetroPCS unlock code, which is used to unlock your MetroPCS-locked iPhone. Upon requesting the code, you will receive it via email and instructions on how to use it. All you have to do is follow those instructions and enter the MetroPCS unlock code when prompted to unlock your Apple iPhone 6s and use it with other carriers.

Q. How can I tell if My Apple iPhone 6s is eligible to unlock if it’s MetroPCS?

MetroPCS has some eligibility requirements to unlock your Apple iPhone 6s. The criteria to be eligible are:

1. You must have purchased your Apple iPhone 6s from MetroPCS.
2. The device to be unlocked must not be stolen, lost, or blocked.
3. The device must be activated for 180 days to be eligible to be unlocked.

If you fulfill these requirements, your phone is eligible to be unlocked.

Q. What do I do if I unlock My Apple iPhone 6s and now my SIM card doesn’t work?

If you get this error, it means that the SIM card you have inserted into the Apple iPhone 6s device is not supported by the activation policy assigned by the activation server. To solve this issue, you need a SIM from a supported carrier and request them to unlock the iPhone.

Click here

### Conclusion

If you own an iPhone locked by MetroPCS but want to use another carrier’s SIM on it, you will have to unlock your phone first. There are several ways to do so. You can either do it the official way by calling MetroPCS and requesting a MetroPCS unlock code, or you can do it easily by using a third-party unlock tool like Dr.Fone. Then there’s a third way that involves using a device unlock app.

While all 3 ways are easy, they require time and patience, except for Dr.Fone, which lets you unlock your Apple iPhone 6s within 5 minutes. So, save your time and money and go for a reliable and foolproof way to unlock iPhone MetroPCS, the Dr.Fone way!

safe & secure

How to Unlock AT&T Apple iPhone 6s with 3 Methods

You might have heard talk of unlocking an iPhone or breaking the carrier lock of an iPhone. This means that you take an iPhone which is locked into a specific carrier and unlock it so that it can be accessed by other carriers as well. It is beneficial to unlock iPhone AT&T as you can then have wider accessibility. Doing so often has the phone dubbed as a SIM-free or contract-free phone. That basically sums it up because an AT&T iPhone unlock can be liberating.

However, without a proper guide the process for AT&T iPhone unlock may get somewhat harrowing, or even end up with bad ESN on your Apple iPhone 6s. As such, this article makes that process easy for you by detailing how to unlock AT&T iPhone by AT&T and without SIM card as well.

Part 1: How to Unlock AT&T iPhone without SIM Card

If you want to unlock iPhone AT&T without a SIM card then a great tool that you can make use of is DoctorSIM - SIM Unlock Service . The truly unique and great thing about this tool is its ease of use and convenience relative to the other approaches available in the market at the moment. It is safe, legal, hassle-free and most importantly, it can be done independently over a simple 3-step process. Furthermore, it is also a permanent solution, which means once broken the carrier lock, you never have to do so again. It’s liberated for life.

Read on to find out how to unlock iPhone AT&T without a SIM card via DoctorSIM. However, it might be helpful to first check whether your Apple iPhone 6s is already unlocked (if you’re not sure.)

How to unlock AT&T iPhone without SIM card

Once you’ve verified that your Apple iPhone 6s really is locked, you can follow the next steps.

Step 1: Select your Phone brand logo and name from a display list

Step 2: Select the Relevant Information

You’ll be asked to provide the Phone Model, Country and Network Provider details.

Step 3: Retrieve the IMEI Code

This is similar to the steps you followed to check your status. Retrieve your IMEI number by pressing #06#

Enter the first 15 digits, and then also add your email address so you may receive the unlock code.

Step 4: Email Confirmation

You’ve just got to wait a while. Within the guaranteed period you’ll receive a mail with further instructions and the unlock code.

Step 5: Enter Code

You’ve just got to enter the unlock code to your phone to AT&T unlock iPhone.

Part 2: How to unlock AT&T iPhone using iPhoneIMEI.net

iPhoneIMEI.net is a great iPhone Unlock Service by which you can factory unlock pretty much any iPhone working on any OS at all, all without jailbreaking. One of the many unique and cool features about this is that you no longer have to worry about iOS upgrade or syncing it to iTunes, because your Apple iPhone 6s will never be relocked.Also, your warranty remains intact with this. Here’s how you can go about making use of this iPhone unlock service.

On iPhoneIMEI.net official website, just select your Apple iPhone 6s model and the network carrier your iphone is locked to, it will direct you to another page. Once you have followed the page instruction to finish the order, iPhone IMEI will submit your Apple iPhone 6s IMEI to the carrier provider and whitelist your device from Apple database. It usually takes 1-5 days. After it’s unlocked, you will receive an email notification.

This is an alternative means by which you can AT&T unlock iPhone. It is a tad more cumbersome and may take a little more time, but is another legitimate means you could opt for should you wish to do so. This is done by directly getting in contact with your Carrier. If you already know that your carrier is AT&T, you can contact them directly and get your Apple iPhone 6s unlocked as follows:

Step 1: Go to their Site and Contact them

1. Go to https://www.att.com/deviceunlock/?#/ first. This is the official location whereby you can contact them.

2. The page will list out certain eligibility requirements. You have to read and agree to them before clicking ‘Continue.’

3. Next, you have to fill up the Request Form, including details about your Wireless number.

Step 2: Email confirmation

1. You’ll receive the unlock request number via email.

2. You need to click on the provided link within 24 hours in order for your unlock request to be officially accepted.

Step 3: Response

1. You should hear back from AT&T within 2 days.

2. If your request has been successful, they’ll send you further instructions about how to unlock your Apple iPhone 6s.

Requirements

However, AT&T has the right to dismiss anyone’s request based on several requirements and criteria, so your application may yet be either rejected or you may have to go through further steps. It is a good idea to go through their requirements before you fill their form.

1. The obvious requirement is that your Apple iPhone 6s must be locked to AT&T, else you should go to the relevant carrier page.

2. You iPhone couldn’t have been reported as either lost or stolen.

3. No record of it having been linked to any criminal or fraudulent activities.

4. All termination fees have been paid in full, and all the other iPhone installment plans, etc, have been completed.

5. After upgrading iPhone you must wait 14 days before you’re eligible for unlock.

Finding out how to unlock AT&T iPhone can be harrowing if you don’t know where to look, especially because performing the unlock can be so crucial for many people in order to access other carriers.

Both the options mentioned above offer a legitimate means by which you can AT&T unlock your Apple iPhone 6s, whether done without a SIM card or by contacting the AT&T carrier.

However, going by personal experience the DoctorSIM alternative offers a much smoother, efficient and quicker alternative to contacting the AT&T carriers. It is also more secure because if you are going via the carrier without a SIM card then you’ll need to back up your Apple iPhone 6s, then delete and restore it as well (for security measures). This isn’t just a time consuming process, but it can also prove to be risky. Furthermore, AT&T has a lot of checks and requisites in place which can keep your Apple iPhone 6s from being unlocked, and even if you do pass the requisites it’s still a time-consuming process which may still be rejected as AT&T has final say. As such, going via DoctorSIM gives you complete agency and conveniently AT&T unlocks iPhone without any data loss, through a simple 3 step process.