How to Unlock Apple iPhone SE (2020) with/without SIM Card

It has become quite easy to unlock a device and be able to use it on any network you choose. This is because carriers are increasingly allowing users to unlock their devices and even offering them to codes they need.

In this article, we are going to look at how to unlock your device with or without the SIM Card. This is the complete guide on how to unlock the sim card iPhone. Let’s begin with what to do if you have a SIM card from your carrier.

But if your Apple iPhone SE (2020) has bad ESN or has been blacklisted, you can check the other post to see what to do if you have a blacklisted iPhone .

Part 1: How to Unlock your Apple iPhone SE (2020) with SIM Card

Begin by seeing if your carrier offers to unlock. Apple advises that you only unlock your device using this method. So if you haven’t already asked them, contact your carrier so they can initiate the unlocking process and provide the unlock code for you. This process normally takes up to 7 days so only come back to the next section of this tutorial after your device has been unlocked by the carrier.

Step 1: Once the carrier confirms that the Apple iPhone SE (2020) device has been unlocked, remove your SIM card and insert the new SIM card you would like to use.

Step 2: Complete the normal setup process and when prompted choose to “Restore from iCloud Backup.” Tap Next to enter your Apple ID and Password and then select a backup to restore the Apple iPhone SE (2020) device to.

This may take some time depending on how much data you have on your iCloud backup as well as the speed of your internet connection.

Part 2: How to Unlock your Apple iPhone SE (2020) without SIM Card

If on the other hand you don’t have a SIM card for your device complete the following process after your Carrier confirms that your

phone has been unlocked, you can follow the instruction below to complete the unlocking process.

Begin by Backing up your Apple iPhone SE (2020)

You can choose to backup you device either via iCloud or in iTunes. For the purpose of this tutorial, we are going to use iTunes.

Step 1: launch iTunes and then connect the Apple iPhone SE (2020) to your computer. Select your device when it appears and then click “Backup Now.”

Erase the Apple iPhone SE (2020) device

Once your backup is complete, erase the Apple iPhone SE (2020) device completely. Here’s how to do it.

Go to Settings> General> Reset> Erase All contents and settings

You may be required to enter your passcode to confirm the process and it may take some time for the Apple iPhone SE (2020) to be completely erased.

Restore the iPhone

When you completely erase the Apple iPhone SE (2020) device, you will go back to the set-up screen. Complete the setup process and then follow these simple steps to restore the iPhone.

Step 1: Launch iTunes on your computer and then connect the Apple iPhone SE (2020) device. Select the Apple iPhone SE (2020) device when it appears and then select “restore Backup in iTunes.”

Step 2: Select the backup you want to restore and then click “restore” and wait for the process to complete. Keep the Apple iPhone SE (2020) device connected until the process is complete.

How to SIM Unlock iPhone with Dr.Fone[Recommended]

Whenever you need to go aboard or want to change to a cheaper carrier provider, you need to SIM unlock your Apple iPhone SE (2020) first. Dr.Fone - Sim Unlock SIM Unlock Service can help you perfectly in this case. It can SIM unlock your Apple iPhone SE (2020) permanently and most importantly, it will not violate your phone’s warranty. The whole unlocking process does not require any technical skills. Everyone can manage it easily.

Dr.Fone - Sim Unlock (iOS)

Fast SIM Unlock for iPhone

• Supports almost all carriers, from Vodafone to Sprint.
• Finish SIM unlock in just a few minutes
• Provide detailed guides for users.
• Fully compatible with iPhone XR\SE2\Xs\Xs Max\11 series\12 series\13series.

3981454 people have downloaded it

How to use Dr.Fone SIM Unlock Service

Step 1. Download Dr.Fone-Screen Unlock and click on “Remove SIM Locked”.

Step 2. Start authorization verification process to continue. Make sure your Apple iPhone SE (2020) has connected to the computer. Click on “Confirmed” for the next step.

Step 3. Your device will get a configuration profile. Then follow the guides to unlock screen. Select “Next” to continue.

Step 4. Turn off the popup page and go to “Settings-> Profile Downloaded”. Then choose “Install” and type your screen passcode.

Step 5. Select “Install” on the top right and then click the button again at the bottom. After finishing the install, turn to “Settings->General”.

Next, detailed steps will show on your Apple iPhone SE (2020) screen, just follow them! And Dr.Fone will provide “Remove Setting” services for you after the SIM lock is removed to enable Wi-Fi as normal. Visit the iPhone SIM Unlock guide to learn more.

Part 4: How to SIM Unlock Your Apple iPhone SE (2020) with iPhone IMEI

iPhone IMEI is another online SIM unlocking service, especially for iPhones. It can help you SIM unlock your Apple iPhone SE (2020) without SIM card or unlocking code from the carrier. The unlocking service privided by iPhone IMEI are Official iPhone unlocks, permanent and lifetime warranted!

On iPhone IMEI official website, just select your Apple iPhone SE (2020) model and the network carrier your iphone is locked to, it will direct you to another page. Once you have followed the page instruction to finish the order, iPhone IMEI will submit your Apple iPhone SE (2020) IMEI to the carrier provider and whitelist your device from the Apple database. It usually takes 1-5 days. After it’s unlocked, you will receive an email notification.

Part 5: How to Update an Unlocked iPhone without SIM

Once you have completed the unlock you can go ahead and conduct a software update on your Apple iPhone SE (2020). To do this on an unlocked device without the SIM card, you need to update the Apple iPhone SE (2020) device via iTunes. Here’s how to do it.

Step 1: Launch iTunes on your computer and then connect the Apple iPhone SE (2020) via USB cables. Select “My iPhone” under the Apple iPhone SE (2020) devices menu.

Step 2: a browser screen will appear displaying the contents in the main window. Click on “Check for Update” under the Summary tab.

Step 3: If an update is available, a dialogue box will appear. Click the “Download and Update: button in the dialogue box and iTunes will show a confirmation message that the update is complete and it is safe to disconnect the Apple iPhone SE (2020) device.

Part 6: YouTube Video for How to Unlock an iPhone

We have outlined Apple’s recommended method of unlocking your device. There are a lot of other ways to unlock your device although having your carrier do it for you is the safest way to do it. However, if you decide to do it, follow the tutorial above to set up your device and update it via iTunes before you can start using it with the new carrier’s SIM card.

How to Unlock AT&T Apple iPhone SE (2020) with 3 Methods

You might have heard talk of unlocking an iPhone or breaking the carrier lock of an iPhone. This means that you take an iPhone which is locked into a specific carrier and unlock it so that it can be accessed by other carriers as well. It is beneficial to unlock iPhone AT&T as you can then have wider accessibility. Doing so often has the phone dubbed as a SIM-free or contract-free phone. That basically sums it up because an AT&T iPhone unlock can be liberating.

However, without a proper guide the process for AT&T iPhone unlock may get somewhat harrowing, or even end up with bad ESN on your Apple iPhone SE (2020). As such, this article makes that process easy for you by detailing how to unlock AT&T iPhone by AT&T and without SIM card as well.

Part 1: How to Unlock AT&T iPhone without SIM Card

If you want to unlock iPhone AT&T without a SIM card then a great tool that you can make use of is DoctorSIM - SIM Unlock Service . The truly unique and great thing about this tool is its ease of use and convenience relative to the other approaches available in the market at the moment. It is safe, legal, hassle-free and most importantly, it can be done independently over a simple 3-step process. Furthermore, it is also a permanent solution, which means once broken the carrier lock, you never have to do so again. It’s liberated for life.

Read on to find out how to unlock iPhone AT&T without a SIM card via DoctorSIM. However, it might be helpful to first check whether your Apple iPhone SE (2020) is already unlocked (if you’re not sure.)

How to unlock AT&T iPhone without SIM card

Once you’ve verified that your Apple iPhone SE (2020) really is locked, you can follow the next steps.

Step 1: Select your Phone brand logo and name from a display list

Step 2: Select the Relevant Information

You’ll be asked to provide the Phone Model, Country and Network Provider details.

Step 3: Retrieve the IMEI Code

This is similar to the steps you followed to check your status. Retrieve your IMEI number by pressing #06#

Enter the first 15 digits, and then also add your email address so you may receive the unlock code.

Step 4: Email Confirmation

You’ve just got to wait a while. Within the guaranteed period you’ll receive a mail with further instructions and the unlock code.

Step 5: Enter Code

You’ve just got to enter the unlock code to your phone to AT&T unlock iPhone.

Part 2: How to unlock AT&T iPhone using iPhoneIMEI.net

iPhoneIMEI.net is a great iPhone Unlock Service by which you can factory unlock pretty much any iPhone working on any OS at all, all without jailbreaking. One of the many unique and cool features about this is that you no longer have to worry about iOS upgrade or syncing it to iTunes, because your Apple iPhone SE (2020) will never be relocked.Also, your warranty remains intact with this. Here’s how you can go about making use of this iPhone unlock service.

On iPhoneIMEI.net official website, just select your Apple iPhone SE (2020) model and the network carrier your iphone is locked to, it will direct you to another page. Once you have followed the page instruction to finish the order, iPhone IMEI will submit your Apple iPhone SE (2020) IMEI to the carrier provider and whitelist your device from Apple database. It usually takes 1-5 days. After it’s unlocked, you will receive an email notification.

This is an alternative means by which you can AT&T unlock iPhone. It is a tad more cumbersome and may take a little more time, but is another legitimate means you could opt for should you wish to do so. This is done by directly getting in contact with your Carrier. If you already know that your carrier is AT&T, you can contact them directly and get your Apple iPhone SE (2020) unlocked as follows:

Step 1: Go to their Site and Contact them

1. Go to https://www.att.com/deviceunlock/?#/ first. This is the official location whereby you can contact them.

2. The page will list out certain eligibility requirements. You have to read and agree to them before clicking ‘Continue.’

3. Next, you have to fill up the Request Form, including details about your Wireless number.

Step 2: Email confirmation

1. You’ll receive the unlock request number via email.

2. You need to click on the provided link within 24 hours in order for your unlock request to be officially accepted.

Step 3: Response

1. You should hear back from AT&T within 2 days.

2. If your request has been successful, they’ll send you further instructions about how to unlock your Apple iPhone SE (2020).

Requirements

However, AT&T has the right to dismiss anyone’s request based on several requirements and criteria, so your application may yet be either rejected or you may have to go through further steps. It is a good idea to go through their requirements before you fill their form.

1. The obvious requirement is that your Apple iPhone SE (2020) must be locked to AT&T, else you should go to the relevant carrier page.

2. You iPhone couldn’t have been reported as either lost or stolen.

3. No record of it having been linked to any criminal or fraudulent activities.

4. All termination fees have been paid in full, and all the other iPhone installment plans, etc, have been completed.

5. After upgrading iPhone you must wait 14 days before you’re eligible for unlock.

Finding out how to unlock AT&T iPhone can be harrowing if you don’t know where to look, especially because performing the unlock can be so crucial for many people in order to access other carriers.

Both the options mentioned above offer a legitimate means by which you can AT&T unlock your Apple iPhone SE (2020), whether done without a SIM card or by contacting the AT&T carrier.

However, going by personal experience the DoctorSIM alternative offers a much smoother, efficient and quicker alternative to contacting the AT&T carriers. It is also more secure because if you are going via the carrier without a SIM card then you’ll need to back up your Apple iPhone SE (2020), then delete and restore it as well (for security measures). This isn’t just a time consuming process, but it can also prove to be risky. Furthermore, AT&T has a lot of checks and requisites in place which can keep your Apple iPhone SE (2020) from being unlocked, and even if you do pass the requisites it’s still a time-consuming process which may still be rejected as AT&T has final say. As such, going via DoctorSIM gives you complete agency and conveniently AT&T unlocks iPhone without any data loss, through a simple 3 step process.

How To Unlock Apple iPhone SE (2020): 3 Ways To Unlock

Is your Apple iPhone SE (2020) SIM locked from the carrier? Whatever the service provider is, it is frustrating that you don’t have a complete hold on your Apple iPhone SE (2020). A SIM card from a different network isn’t available. But fortunately, you are in the right place. This guide will show you the tools to unlock your Apple iPhone SE (2020).

In this article, we’ll talk about two main ways to check if your Phone is SIM-locked and the three best methods to unlock your Apple iPhone SE (2020). After reading this article, you’ll be able to choose whatever carrier you want.

2 Mains Ways to Check If Your Apple iPhone SE (2020) is SIM-Locked

The following are two main ways to check if your Apple iPhone SE (2020) is SIM-Locked.

Check the “Carrier Lock” in “Settings.”

1. Open the Settings App
2. Select general

3. Tap About

4. Scroll to the bottom and look for the carrier log. If it says the No SIM restrictions, your Apple iPhone SE (2020) is free, and you can use any carrier or cell service. If it displays other images, then it is probably locked.

Insert a SIM card of another carrier into Apple iPhone SE (2020)

1. Power off your Apple iPhone SE (2020).
2. Use a straight pin to open the SIM Tray and remove the sim card
3. Place the sim card of the different carriers into the sim card tray of the iPhone. Push the tray back into place.
4. Power the Apple iPhone SE (2020) ON.
5. Make a call to any working number. If you get an error message, then your Apple iPhone SE (2020) is locked. Your Apple iPhone SE (2020) is unlocked if you can connect and make the call.

4 Best Methods to Unlock Apple iPhone SE (2020)

Following are three methods to unlock Apple iPhone SE (2020)

Method 1: Contact your carrier for unlock code

When a customer signs a contract with a big cell phone company for a certain amount of time, they often get a discount on a device. Because of this, the Apple iPhone SE (2020) device comes with a controller lock so customers can only use it on their network.

You can leave without paying anything if your agreement with the company is over. You must meet the following requirements before you can unlock your Apple iPhone SE (2020):

• First, the Apple iPhone SE (2020) device must be legal. It means the Apple iPhone SE (2020) device has not been reported as lost, stolen, or connected to a crime.
• Then you shouldn’t have any debts in your bank account.
• If you signed a contract in exchange for a lower price upfront, you would have to wait until your contract ended (usually 24 months) or pay the remaining balance if you bought your phone on a payment plan.

Note: the unlocking process is different for each company.

How to unlock the Apple iPhone SE (2020) locked by AT&T

First, you need to know that AT&T limits how many devices a customer can unlock in a given year. Customers can unlock up to five devices per year if their account is in great condition. Visit the AT&T support page for more information about how to unlock an AT&T device and if you meet the requirements.

AT&T Unlocking security question

• The full name of the person whose name is on the account
• Last four digits of the account holder’s social security number
• AT&T passcode of the registered account owner if they have an online account.
• The IMEI number of the Apple iPhone SE (2020) is 11/12. The serial number of the Apple iPhone SE (2020) device is called the IMEI number. You can find it on the original packaging, under the battery, and on the back of some models, by dialing #06 or navigating to Settings > General > About.

How to unlock the Apple iPhone SE (2020) locked by T-Mobile

T-Mobile has set several standards that should be matched to complete an unlock request.

• The device must be completely paid off, and the account must be in great condition.
• In the past 12 months, less than two SIM unlock codes for each line have been asked for.
• The device had used the T-Mobile network for at least 40 days before it was asked to be unlocked.
• If you have a service contract and have made a payment for at least 18 consecutive months, or if you paid a relocation fee. There are a few special cases that Customer Service can explain in more detail if required.
• The phone must have at least $50 worth of recharges paid for on prepaid plans.
• If you meet the above prerequisites, you can unlock an Apple iPhone SE (2020) carrier locked by a T-Mobile device by calling customer service at 611 from the Apple iPhone SE (2020) device you want to unlock.
• Make sure you have ALL of the following information on tips when you call:

1. The main account holder’s phone number
2. Account Password
3. Account holder’s SSN’s last four digits
4. IMEI number. You can find this by navigating Settings > General > About or dialing *#06#.

Method 2: Some SIM-unlock websites

Following are some popular SIM-Unlock websites you can consider to unlock your Apple iPhone SE (2020).

AppleiPhoneUnlock

This website says that it can help you unlock your Apple iPhone SE (2020) or iPad. Please prepare your IMEI code and confirm the Apple iPhone SE (2020) device model. But when we did some research, I found that this website has some bad customer reviews. So, if you consider using them to unlock your Apple iPhone SE (2020), you should be more careful in checking the availability.

Rating from Trustpilot	3.8
The Pricing Plans	From £19.99
Supported Device Models	From iPhone 4- iPhone 13/iPad/Apple Watch/Mac

Pros:

• The remote SIM lock removal
• It’s the permanent unlocking
• Refunds with unsuccessful unlock

Cons:

• Too long-time process
• Not 100% unlock success

Cellunlocker

You can buy unlock codes and services for phones locked on the Cellunlocker website. This website may help you unlock your Apple iPhone SE (2020) if it is locked to a carrier or the activation lock is turned on. This site is legit and has several satisfied customers.

Rating from Trustpilot	4.6
The Pricing Plans	AT&T-90$
T-Mobile-139$
Veizon-30$
Supported Device Models	It doesn’t work on phones bought in the US after January 2013. So, this service doesn’t work for iPhone 11 and even later.

Pros:

• Support users from more than 180 countries and regions
• Simple interface
• Refunds with unsuccessful unlock

Cons:

• Too strict refund policy while the unlocking video is required

DoctorsSIM

DoctorsSIM has services that can be used to unlock an Apple iPhone SE (2020). This site lets you unlock phones from many brands, not just Apple. The services they provide make most of their customers very happy. So, this site has been able to gain customers’ trust by providing excellent unlocking services. This strong and effective tool can unlock all phones with a 99% success rate.

Rating from Trustpilot	4.7
The Pricing Plans	From $36 for Verizon to $180 for AT&T
Supported Device Models	From iPhone 3GS to iPhone 14/iPad

Pros:

• Complete remote unlocking service
• Multiple payment methods
• 24 h customer support

Cons:

• One of the most expensive service
• The unlocking process may require more than 18 days

Method 3: Try a SIM-unlock chip

iPhone unlock chips allow iPhones to run on any network globally. Unlocking an iPhone with this option is a cheap and very easy way. The Apple iPhone SE (2020) unlock chip allows a locked Apple iPhone SE (2020) to call and text using the local network sim card like a factory-unlocked phone. Unlock chip is a small SIM card that can be used along with regular SIM cards.

However, these Sim-unlock chips have some drawbacks. It reduces the Battery life and may cause SIM card slot and SIM card issues.

Method 4: Easy App for iPhone SIM Unlock

You should find an easy way to unlock your Apple iPhone SE (2020) and run like a normal iPhone. Your search will end here because I’ll tell you about Software that will help you unlock your Apple iPhone SE (2020) without losing any data.

Dr.Fone - Screen Unlock (iOS)

Step1: Download the Dr.Fone - Screen Unlock (iOS)

Step2: Start Wondershare Dr.Fone after you’ve installed it on your computer. Go to the home page and select “Screen Unlock” from the list of options.

Step3: In the next window, choose “Remove SIM Locked” if you want to eliminate the network restriction on your device.

Step4: Tap “Start” to get started when your iOS device is ready to be SIM unlocked.

Step5: The Software will display a list of information about it. Check to ensure everything is right, and click “Unlock Now.”

Step6: Before moving on with the process, you must jailbreak your Apple iPhone SE (2020). This method works with iPhone 5S to iPhone X running iOS 12.0 to iOS 14.8.1. So, if you want to learn about technology, you must either read the guide or watch the video.

Step7: The next step is to do some small tasks on your iOS device. Take the SIM card out of the Apple iPhone SE (2020) device and go to “Settings.” Tap “Forget This Network” on every connection you’ve made in the “WLAN” section. When you’re done, turn off “WLAN” and put the SIM card back on your iOS device. Click “Continue” on the screen to move forward with the process.

Step8: The status bar shows the SIM unlocking process.

Step9: The device is successfully unlocked, and there are no more restrictions from the SIM carrier. Tap “Done” to remove the SIM lock from your iOS device.

Conclusion

So, these were the methods to check if your Apple iPhone SE (2020) is Sim-locked, and three ways to unlock your Apple iPhone SE (2020) if it is Sim Locked. You can contact your carrier to unlock your Apple iPhone SE (2020), which is an official way of removing barriers.

Moreover, you can consider the services of some online websites to unlock your Apple iPhone SE (2020). And Dr.Fone - Screen Unlock (iOS) is one of the most reliable and easy software that unlocks your device by following some very easy steps.